i have american dj flash panel 16 rgb 48....
for example: i have 20 panell this is 5x4 they are 2 dmx universe and problem is that is repeated on panel...if i klik with mouse on first panel c1u1 is flashing c1u2..... what i must do that ist not repeated!! thankyu!

Hi,
---
Step 1:
adressing your panel for the DMX channels. For first LINE.
Set the first panel to CHANNEL 1, the second panel to CHANNEL 49, the third panel to CHANNEL 97, ......
-
And in the second LINE do the self.
Set the first panel to CHANNEL 1, the second panel to CHANNEL 49, the third panel to CHANNEL 97, ......
-
Now you have two LINEs. The first LINE is UNIVERSE 1 and the second LINE ist Universe 2.
---
Step 2:
Make in MADRIX with the MatrixGenerator (press F2) your patch. Select
protocol: DMX
Fixture: American DJ Flash Panel 4x4 48ch RGB
Rotation: original
Count X: 5 Y: 4
Start Corner: Top Left
Main Orientation: Horizontal
Snake Mode: Check
With Fixture Rotation: UnCheck
DMX Start Channel: 1
DMX Start Universe: 1
-
see picture

---
Step 3:
In DeviceManger of MADRIX (press F4)
you can activated your DMX interface with check box ENABLE. And you can set the interfaces to Universe 1 and Universe 2.
activate your DMX interface and select used universe.
-
see picture, i have simulate this with other interface

---
Step 4:
Select the SCE ColorRamp Effect, set it to diagonal direction and check your output screen.
-
see picture

---
-
I hope its running with this example.