sACN / E1.31 unicast support

This is the forum, where you can add your wishes and feature requests.

Moderator: MADRIX Team

Locked
mattm
Posts: 8
Joined: Tue Jul 31, 2012 9:37 pm

sACN / E1.31 unicast support

Post by mattm »

Hi, just wondering whether Madrix 3 will add support for unicast addressing under sACN/streaming ACN/E1.31?

Thanks,
Matt
User avatar
Wissmann
Developer
Developer
Posts: 767
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann »

Not in Version 3.0, sorry.
LEDs are nothing without control ;-)
billinsofl
Posts: 19
Joined: Tue Nov 01, 2011 9:26 am

Re: sACN / E1.31 unicast support

Post by billinsofl »

I would also like unicast support added!!!
billinsofl
Posts: 19
Joined: Tue Nov 01, 2011 9:26 am

Re: sACN / E1.31 unicast support

Post by billinsofl »

Has Unicast been added in any version?? I previously asked if it was possible to include support for LIFX bulbs. There’s hardly any reason to upgrade again with no LIFX or E1.31 Unicast.

Multicast completely crippled the network, which means I need more hardware or complex configurations.
User avatar
Wissmann
Developer
Developer
Posts: 767
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann »

Hi,
the unicast for sACN was added in MADRIX 5.0 | May 07, 2018
https://www.madrix.com/products/software/releases#M50
and
Phillips HUE ist supported as well
http://help.madrix.com/m5/html/madrix/i ... s_hue.html
LEDs are nothing without control ;-)
User avatar
Wissmann
Developer
Developer
Posts: 767
Joined: Fri Feb 23, 2007 3:36 pm
Location: Germany
Contact:

Re: sACN / E1.31 unicast support

Post by Wissmann »

You are welcome!
LEDs are nothing without control ;-)
Locked