MADRIX Forum

Hallo Flatlinersholger, Es sollte funktionieren, wenn du zuerst MADRIX 5 und dann die PC Dimmer Software startest. Dies ist in diesem Fall entscheidend, da nur die zuerst gestartete Software Daten senden -und empfangen kann. Die zweite Software kann dann nur Daten senden. Natürlich kannst du auch wi...

Hi jasongoetz,

Please send us all error logfiles from the following file path to info[at]madrix[dot]com:
C:\Users\[YOUR USERNAME]\Documents\MADRIX5\logs

Thanks in advance!

Hi webcentrik,

Please send us all files from the master and slave AURA to info[at]madrix[dot]com. Thanks in advance!

Additional questions:
- Do you use remote control? If yes, please double check if the correct universe is in-use.
- Which firmware version do you use?

Hi Hansel, Welcome to the MADRIX forum! You could use the "SCE Simple Shape" effect and a macro, which calculates the current sun position. The position data is then used to adjust the position of the shape on the matrix. On the other hand you could use the "draw" or "SetPix...

Hi webcentrik, You don't need to add any Art-Net devices for the dxd conversion to work. You only need to use the correct patch and to enter the correct virtual universes (those from the patch) in the DXD Conversion menu. Also I really need to sync the Auras as they have a 32 and an 8 but there won'...

Hi Max X,

Please double check if all checkboxes are enabled in the "Open Setup Options", when loading the setup.
The DMX remote configuration as well as the Patch are part of the setup.

Hi Dingken,

Thank you for your feedback.

The list will be refreshed if a change was done on the interface (for example a new interface is connected or it was restarted). This cannot be disabled, I'm sorry!

Hi Max X, Welcome to the MADRIX Forum! Yes, this is possible and you don't need a macro to do it. You will find the function in the DMX-IN Remote Editor under Deck A / Deck B > Storage Place > Layer > Opacity > Layer Here you can learn how to create a custom DMX-IN configuration / map: https://help....

Hi Waiii,

Please add a space between the [line feed] and the Host and try again: Does it work correctly now?

Hi cuthbec,

Yes, you are right. I made a little mistake in my example, the third list entry should be assigned to DMX channel 3. Sorry!