MADRIX Forum • Philips Color Kinetics / iPlayer
Page 1 of 1

Philips Color Kinetics / iPlayer

Posted: Sun May 14, 2017 7:54 am
by MaxMadrix
Hi
First post here.
I am setting up a 4 universe (Luna most likely) lighting system with Madrix software. I have a separate Philips Color Kinetics system using an iPlayer 3 and auxbox. How do I determine whether I can control the CK system through the same Madrix software?

Thank you

Re: Philips Color Kinetics / iPlayer

Posted: Mon May 15, 2017 12:43 pm
by Fritzsche
Welcome!
.
Does the iPlayer support receiving KiNET from a third-party controller?
.
Here area couple of points to start with:
.
1) I would recommend to download the demo version of MADRIX and test the KiNET system with it.

2) Since you are likely to run two network protocols (Art-Net for the LUNA 4 as well as KiNET), it would be necessary to use 2 separate network cards.

3) In MADRIX, you can then activate both protocols and configure your devices in the Device Manager > DMX Devices as needed. Before that, you would have set up your lighting fixtures in the Patch Editor.
.
Does that help?
.
Thanks! Martin