How to send cues
Posted: Thu Apr 08, 2021 11:35 pm
Hello all, super new to Madrix. I have a client that has tasked me with learning Madrix and setting up a "simple" configuration for them. I only have 1 led strip to test and got it working through artnet, but the some of the requirements I haven't quite figured out how to do.
The client is asking for this: There are 14 different pieces, each has 4 separate led strips that go around a led screen. Out of the 14 pieces, there needs to be 4 different "Looks" running in its native state. So piece 1-4 are all green and sparkling, piece 5-7 are red and breathing, 8-11 are blue and chasing, and 12-14 are all white and random. Additionally when a certain dmx signal comes in, all of the 14 pieces change to 1 look for a timed duration and then go back to the native state.
I've programed in midi so far (eventually it will be dmx control) to setup the trigger for 7 seconds, but am not sure how to separate the different looks via cues (or a patch) and then have them all come back properly.
The client is asking for this: There are 14 different pieces, each has 4 separate led strips that go around a led screen. Out of the 14 pieces, there needs to be 4 different "Looks" running in its native state. So piece 1-4 are all green and sparkling, piece 5-7 are red and breathing, 8-11 are blue and chasing, and 12-14 are all white and random. Additionally when a certain dmx signal comes in, all of the 14 pieces change to 1 look for a timed duration and then go back to the native state.
I've programed in midi so far (eventually it will be dmx control) to setup the trigger for 7 seconds, but am not sure how to separate the different looks via cues (or a patch) and then have them all come back properly.