MADRIX Forum • Sacn input controller
Page 1 of 1

Sacn input controller

Posted: Mon Oct 10, 2022 9:15 pm
by toninolotta
Hi, I have a question, I have a series of dmx input channels with which I would like to control places, for example channel 45 at 100% must send place 17, how can I do? with dmx remote I control the madrix as if it were a mediaserver, can it be done differently?
thank you

Re: Sacn input controller

Posted: Tue Oct 11, 2022 12:12 pm
by Fritzsche

Yes, DMX-IN/sACN Input and the DMX-IN Remote Editor are the right tools for this.

Make sure to use the correct function, such as Deck A/B > Place ID + Fade, and in order to call up Storage Place 17, you need to enter value 16 in the column MAX. Indexing starts with 0 in this case, which is why you need to substract from the GUI number (17 - 1 = 16).

Re: Sacn input controller

Posted: Tue Oct 11, 2022 6:01 pm
by toninolotta
thanks, for the master can I use a other Channel at full? tomorrow morning I'll try, thanks again
madrix team you are great