LUNA16 - DMX OUT 9-16 DOES NOT WORK (NO SIGNAL)

Moderator: MADRIX Team

Post Reply
hakan.koc.jtk
Posts: 2
Joined: Thu Feb 11, 2021 5:17 pm

LUNA16 - DMX OUT 9-16 DOES NOT WORK (NO SIGNAL)

Post by hakan.koc.jtk »

Hi

LUNA16 + MADRIX 5 (Basic Licence)
No Signal Output at DMX Outputs 9-16; where Outputs 1-8 work fine (both tested with USB & Art-Net,Ethernet
All outputs ON (1-16); tested also with DMX In ON or OFF

Tested with default MADRIX Setup or custom patching setup
DMX Watcher shows DMX Out as per the program, yet no physical output signal at the Luna16 Outputs 9-16

DMX signal is tested with Swisson XMT-350

Looking forward to receiving your support
Guertler
Support
Support
Posts: 880
Joined: Tue Feb 04, 2014 10:47 am

Re: LUNA16 - DMX OUT 9-16 DOES NOT WORK (NO SIGNAL)

Post by Guertler »

This issue report was also send via e-mail.

It was a hardware issue especially in this LUNA 16.
The issue has been already solved.
Schulze
Support
Support
Posts: 304
Joined: Fri Mar 22, 2019 4:21 pm
Contact:

Re: LUNA16 - DMX OUT 9-16 DOES NOT WORK (NO SIGNAL)

Post by Schulze »

Hi richardshodges,

In such cases the device needs to be sent back to us alongside with an filled-out RMA document. The device will be then repaired in-house. If you open or manipulate the device yourself, you will loose warranty. Just contact us if you are facing hardware issues!

Thank you.
Post Reply