MADRIX Forum

Hello Ashley,
.
When you are looking for a visualizer you can for instance search for: "Realizzer 3D", "Cast wysiwyg" or "Capture Argo" in the internet.

Hello Ashley, . First of all can you please tell us which MADRIX version you use? You will find the information of the version when you go in MADRIX to "Help > About". . Regarding your question about a visualizer software: You can connect MADRIX with all visualizer software which is using ...

Hello Ashley, . You wrote: "- If i add 170 LEDs starting at X = 171, Y = 1 i assume its taken that i would have these strips end to end (as thats how it shows as 340 LEDs in 1 line on the map)?." . When you want to patch the pixels in the way you have described (end to end) you have to pat...

Hello Ashley, . The problem is the following: You have added fixtures in a horizontal line beginning at position X = 1 and Y = 1 on Z-Layer 1 before. I think thatt's are the pixels of your first DMX universe. Now you want to add the pixels of the second DMX universe to the same position. To solve th...

Hello bvanenk, . When you want to control MADRIX remotely via Art-Net Input you have to make sure that the MADRIX PC and also the Art-Net node are working in the same network range but with different IP addresses. You wrote the Art-Net node has the following IP address: 2.39.2.244 then the IP addres...

Hello Ashley, . To create the arrangment of the LED pixels you have to use the MADRIX "Patch Editor". In the patch editor you can add the desired pixels and change the position in the grid. So you can locate every pixel as it is in orignal. In the follwing links you will find tutorials how...

Hello ricovijay, . When you are using a PLEXUS in stand alone mode you can control the trigger to play the next scene or to play a desired scene remotely. In the following link you can learn how you can control the PLEXUS in stand alone mode remotely. http://help.madrix.com/m3/html/plexus/index.html...

Hello Dani Tzahan, . You can easiely move the MADRIX Touch interface to another display. Therefor please press the "Tab" Key on your keyboard. In the following link you can learn more about the MADRIX Touch interface: http://help.madrix.com/m3/html/madrix/index.html?hidd_touch_screen.html ...

Hello Klanook, . The two DMX channels for the "Goto" command in the MADRIX Cue List work in the following way: - Goto Low 255: with this channel you can jump to the individual Cue List entries. - Goto High 255: means you will create an offset. The offset will be calculated from the current...

Hello chuck-kern, Welcome to the MADRIX forum. . When you want to connect a DMX interface like an Art-Net node to a desired fixture you have to make sure that the fixture is able to receive DMX signals. The described LED stripe seems not to be able to receive DMX signals. . But some of such LED stri...