MADRIX Forum

Hello Armstrong, Welcome to the MADRIX Forum. . When you want to have different effects on different pixel positions in MADRIX you have to work with layers and the MADRIX Map mode. With the help of the Map you can change the size and position of each layer. In the following links you can learn more ...

Hello radhe, . Please note: CITP and Art-Net are different protocols with different requirements. In case of CITP you only need to enable the CITP Server in MADRIX. In case of Art-Net Remote you need to enable Art-Net and the Art-Net Remote in the MADRIX "Device Manager", setup the correct...

Hello radhe, . Also when you are using the grandMA onPC the network card of the PC will have an IP-Address on which the grandMA software will have access and send the Art-Net data. Please have a look to the IP-Address settings of the grandMA PC. To find these setting please go to: "Windows Star...

Hello radhe,
.
Can you please tell me the IP address of your grandMA console?

Hello radhe, . When you want to control MADRIX remotely with your grandMA 2 you will have two possibilities: 1.) Control MADRIX remotely via DMX. In that case you will need a MADRIX DMX input interface like the USBone, NEO, PLEXUS, LUNA. In the following link you can learn how you can control MADRIX...

Hello radhe, . When you want to control MADRIX remotely with a grandMA 2 via Art-Net please make sure that you have set the receiving IP address in MADRIX to the IP address of the grandMA console. Therefor please opnen the MADRIX "Device Manager" and perform a double click with the left mo...

Hello cg,
.
Thank you for your input.
At the moment it is not possible to control two overlapping fixtures on the same position with two fixture groups independently.
We will discuss this feature request with the developers.

Hello Didda,
.
You can also test the "DMX Mapping" function in MADRIX Demo mode. It will work.
But also in case of "DMX Mapping" MADRIX will interrupt the DMX output every minute if it is running in Demo mode.

Hello jholmes,
.
Can you please explain this time code problem more detailed?
Thank you.

Hello LAURTIB, . Some soundcards are activating the microphone/line in channel after a cable was plugged to the connection jack. If this will not help please open the Windows Recording Devices window. Perform a click with the left mouse button in the Recording Devices list and enable "Show Disa...