Controlling led tube rgb lt-2816 48ch

Write here what nice effects or shows you have done with MADRIX or ask other users.

Moderator: MADRIX Team

Locked
koymy
Posts: 2
Joined: Tue Mar 10, 2015 5:12 am

Controlling led tube rgb lt-2816 48ch

Post by koymy »

Hi all, im having trouble with this dmx tube light. Im using enttec usb. I know that madrix dont care anymore about it. The problem is, it seem theres a delay between madrix and the tube. Ive tried to change the fps, standard is 1000ms/1fps . But still not working .IF any of you tried this setup, can u share with me. :|
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Controlling led tube rgb lt-2816 48ch

Post by Fritzsche »

Hi!
.
I would recommend to adjust the FPS again. Try a setting such as 30 ms / 33.3 FPS or 40 ms / 25 FPS.
.
Please also activate 'Full Frames' and test your setup again.
.
Does this solve the problem?
koymy
Posts: 2
Joined: Tue Mar 10, 2015 5:12 am

Re: Controlling led tube rgb lt-2816 48ch

Post by koymy »

thanks for replying.. no its not workin delay. the delay is about 1sec
Locked