Sacn input controller

Post Reply
toninolotta
Posts: 4
Joined: Wed Mar 12, 2014 12:33 am

Sacn input controller

Post by toninolotta »

Hi, I have a question, I have a series of dmx input channels with which I would like to control places, for example channel 45 at 100% must send place 17, how can I do? with dmx remote I control the madrix as if it were a mediaserver, can it be done differently?
Regards
thank you
Fritzsche
Support
Support
Posts: 735
Joined: Mon Oct 05, 2009 5:26 pm
Contact:

Re: Sacn input controller

Post by Fritzsche »

Hi!

Yes, DMX-IN/sACN Input and the DMX-IN Remote Editor are the right tools for this.

Make sure to use the correct function, such as Deck A/B > Place ID + Fade, and in order to call up Storage Place 17, you need to enter value 16 in the column MAX. Indexing starts with 0 in this case, which is why you need to substract from the GUI number (17 - 1 = 16).
toninolotta
Posts: 4
Joined: Wed Mar 12, 2014 12:33 am

Re: Sacn input controller

Post by toninolotta »

thanks, for the master can I use a other Channel at full? tomorrow morning I'll try, thanks again
madrix team you are great
Post Reply