MADRIX Forum

Hi andrewpsyc, Welcome to the MADRIX forum. You can achieve this by creating (or editing) a corrosponding fixture in the MADRIX Fixture Editor and use it for your patch. Here you can learn how to create own fixtures: http://help.madrix.com/tutorials/html/hidd_fixture_editor.html http://help.madrix.c...

Hi endov, Please ensure that the Windows driver of your MIDI controllers are installed correctly. Furthermore it is important that the MIDI controllers will be found in the MIDI tab of the MADRIX Device Manager.   If you want to trigger Cues/Storage Places you need to create a corrosponding "MI...

Hi Prism, MADRIX NEBULA is not able to output different voltages levels (12V and 24V in this case) to different ports. But you have different valid options to connect your LEDs: 1) Feed power to the LEDs and the NEBULA seperatly and connect DATA and GND only to the NEBULA. Which means three power su...

Hi Partyschorschi, Welcome to the MADRIX Forum. The max. recommended wire length between NEBULA and LEDs or between LEDs depends on the protocol, signal frequency, cable cross-section, and cable shielding. You should use a shielded twisted pair cable for the data transmission (for example CAT5E SF-U...

Hi moles93, The timecode has to be assigned in milliseconds in the CSV-file (CSV-Cuelists are millisecond-based). For example (framerate is 25 frames per second), which means one frame is 40 ms long: Therefore you need to convert the frames (5 frames) into milliseconds, by multiplying them with the ...

Hi vudiemphuongchi, You can achive this by using the SCE Pulse / Stroboscope effect and map it on the 5000k led strip in MADRIX, by using different layers and the mapping option: 1) Create two Fixture-Groups in the Patch Editor, the first one representing the RGB lights and the second one for the 50...

Hi vudiemphuongchi, You need to use two different fixtures in the patch editor. I recommend to use the "!generic BRG Light 1 pixel" for the first strip and "!generic GRB Light 1 pixel" for the second one. Alternativly you can create your own corrosponding fixtures, and thus defin...

Hi marknicolai192, I highly recommend to contact a "PC system house" and ask for 19'' rackmounted PCs, as there are too many hardware retailers/manufacturers on the market. For the system requirements of MADRIX 5 visit: http://help.madrix.com/m5/html/madrix/hidd_system_requirements.html I ...

Hi Spasov, Of course you can use the MADRIX KEY on different computers, but the full version of MADRIX will be only unlocked on the computer with plugged-in MADRIX KEY. If you want to "move" to another computer, just plug-in your MADRIX KEY after installing MADRIX 5. I hope this helps you,...

Hi jeroenvandorsten, Welcome to the MADRIX forum. Combining Licenses is not possible with MADRIX 5. You are able to upgrade from MADRIX 5 start to MADRIX 5 entry, which enables output for 8 universes. Please note that with each license upgrade the maximum possible output will be quadrupled. For 10 D...